GroundIQ Design
One integrated 3D ground model you can design with.
Geophysics and geotechnics fused into one integrated 3D ground model with the numbers you design with: stiffness, pile capacity, settlement and foundation options, each with confidence attached.
We model every structure in 3D. Let's do the ground too.
Parameters come from vertical profiles at points, and the cautious estimate has to cover everything between them. That uncertainty becomes concrete, steel and pile metres, paid for on every project.
3D ground model
One integrated 3D model from geophysics and geotechnics
Geophysics covers the whole site but reads the ground indirectly. CPTs are direct, but only where you drilled. GeoFuse learns how the two relate here - and shows which parts are measured, which predicted.
Design parameters
Ground parameters for every point on site
Layers, strength and stiffness at every point, not only where you tested. Each one carries a confidence level, so you can see where the model is sure and where it isn't.
Geotechnical design
Geotechnical design on a 3D model
Foundations, settlement, excavations - analysed on the ground actually beneath them, not one profile held across the site. Whoever runs the analysis, it runs on the same model.
The difference
3D models enable optimised design
Design today works from vertical profiles at a few test points. A 3D model shows the variation between them, so piles, walls and excavations can be sized to the ground beneath them - sometimes less, sometimes more, in the right place.
Testimonials
Trusted by infrastructure and geotechnical teams.
.png)
GroundIQ® in action: Ruling out hidden ground risks for a hyperscale data centre
.png)
Seeing Inside a Tailings Dam: How GroundIQ® Helped Rule out Hidden Structural Risks